ISO 20304-4:2026

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٢٧ أغسطس ٢٠٢٦

Fine bubble technology — Water treatment applications — Part 4: Test method for evaluating the antifouling performance of fine bubble water in crossflow membrane filtration systems

ملفات الوثيقة ISO 20304-4:2026

الإنجليزية 54 صفحات
الإصدار الحالي
BHD 91.31

مجال الوثيقة ISO 20304-4:2026

This document specifies a method for assessing the impact of ultrafine bubbles (UFBs) on membrane antifouling using the crossflow filtration system as the evaluation setup. The evaluation compares the membrane fouling behaviour of the original wastewater (control) with that of the same wastewater after UFB generation under specified operating conditions. This document is applicable to dispersions containing UFBs, including dispersions in which microbubbles (MBs) are present in combination with UFBs.

The method employs the crossflow membrane fouling index (CMFI), measured under constant transmembrane pressure during crossflow filtration as the evaluation criterion.

This method is applicable to various membrane treatment systems including ultrafiltration, nanofiltration, and reverse osmosis and can be used for different types of wastewater containing particulates, colloids, and soluble organic matter.

This method is primarily intended for dispersions containing UFBs (see Annexes A to C and E); however, it is equally applicable, by analogy, to dispersions containing MBs (see Annex D).

This document can guide the design and optimization of industrial processes that integrate FB technologies for enhanced membrane antifouling.

NOTE 1        This method is intended for waters that contain a measurable amount of either particulate matter or colloidal matter, or both. It is not applicable to essentially particle-free waters, such as permeate from reverse osmosis or ultrafiltration systems.

NOTE 2        Users can record supplementary information, e.g., turbidity, total suspended solids, and particle-size distribution; however, such data are not required in this document.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
GSO 2055-1:2015
 
لائحة فنية خليجية
منتجات الحلال – الجزء 1: الاشتراطات العامة للأغذية الحلال
GSO 9:2022
 
لائحة فنية خليجية
بطاقات المواد الغذائية المعبأة
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 21611:2026
 
مواصفة قياسية دولية
Dentistry — Vocabulary for source conclusion for human identification by dental evidence
ISO 21815-4:2026
 
مواصفة قياسية دولية
Earth-moving machinery — Collision warning and avoidance — Part 4: Risk area and risk level for swing and rotation motion
ISO 4576:2026
 
مواصفة قياسية دولية
Plastics — Polymer dispersions — Determination of sieve residue
ISO 8553:2026
 
مواصفة قياسية دولية
Milk — Enumeration of microorganisms — Plate-loop technique at 30 °C